Loughborough University Research Publications
Loughborough University
Leicestershire, UK
LE11 3TU
+44 (0)1509 263171
Loughborough University

Loughborough University Research Publications


Publications for Dowon Bae

From (year): To (year):

Download all publications as Word document


Journal Articles

Kim, J, Russell, JB, Jaffri, SB, Brightman, E, Robertson, SD, Seo, J, Bae, D (2026) Bromine Retention Versus Electrochemical Accessibility in a Ferri‐/Ferrocyanide–Bromine Flow Battery, ChemElectroChem, 13(20), e70319, ISSN: 2196-0216. DOI: 10.1002/celc.70319.

Emberson-Marl, J, Ndala, Z, Kim, J, Peter, N, Russell, J, Erasmus, R, Moloto, N, Amolo, GO, Chepkoech, M, Bae, D (2026) Accelerating alkaline water electrolysis by integrating solar-thermal energy and temperature-sensitive Ni-Co-Fe layered double hydroxide catalysts [Abstract], ECS Meeting Abstracts, MA2026-01(38), pp.1986-1986, DOI: 10.1149/ma2026-01381986mtgabs.

Tangthuam, P, Aupama, V, Suttipong, M, An, T, In, I, Yonezawa, T, Bae, D, Yeh, L, Kheawhom, S (2026) Front Cover: From Molecule to Stack: A Cross‐Scale Design Framework for Aqueous Organic Redox Flow Batteries (Batteries & Supercaps 6/2026), Batteries & Supercaps, 9(6), ISSN: 2566-6223. DOI: 10.1002/batt.70355.

Tangthuam, P, Aupama, V, Suttipong, M, An, T-K, In, I, Yonezawa, T, Bae, D, Yeh, L-H, Kheawhom, S (2026) From molecule to stack: a cross-scale design framework for aqueous organic redox flow batteries, Batteries and Supercaps, 9(5), e70301, DOI: 10.1002/batt.70301.

Maldifassi, JTB, Russell, J, Kim, J, Brightman, E, Chen, X, Bae, D (2025) Electrolyte design for thermally regenerative redox flow cells [Abstract], ECS Meeting Abstracts, MA2025-02(6), pp.905-905, DOI: 10.1149/ma2025-026905mtgabs.

Salvado-Recarey, O and Bae, D (2025) Temperature impact on thermo-electrochemical behavior of silicon-based photoelectrochemical flow cells, The Journal of Chemical Physics, 163(7), 074704, ISSN: 0021-9606. DOI: 10.1063/5.0283536.

Kim, J, Akhtar, T, Liu, Y, Smirnov, V, Kim, H, In, S-I, Han, D-H, Bae, D (2025) A 25 cm2 single Si-based solar redox flow battery with aqueous iodine-bromine redox couples, Journal of Power Sources, 644, pp.237045-237045, ISSN: 0378-7753. DOI: 10.1016/j.jpowsour.2025.237045.

Maldifassi, JTB, Russell, JB, Kim, J, Brightman, E, Chen, X, Bae, D (2025) Correction: Evaluation of redox pairs for low-grade heat energy harvesting with a thermally regenerative cycle, Energy Advances, 4(3), pp.460-460, DOI: 10.1039/d5ya90008e.

Kim, J, Bae, D, Park, C, Park, H (2025) Pre-detection of thermal runaway in Li-ion 18650 batteries via temperature and voltage: the importance of temperature measurement location, Applied Thermal Engineering, 269(A), 125991, ISSN: 1359-4311. DOI: 10.1016/j.applthermaleng.2025.125991.

Maldifassi, JTB, Russell, J, Kim, J, Brightman, E, Chen, X, Bae, D (2024) Evaluation of redox pairs for low-grade heat energy harvesting with thermally regenerative cycle, Energy Advances, 3(12), pp.2877-2886, ISSN: 2753-1457. DOI: 10.1039/d4ya00368c.

Hiragond, CB, Kim, J, Kim, H, Bae, D, In, S (2024) Elemental‐Doped Catalysts for Photoelectrochemical CO2 Conversion to Solar Fuels, Solar RRL, 8(11), ISSN: 2367-198X. DOI: 10.1002/solr.202470111.

Hiragond, CB, Kim, J, Kim, H, Bae, D, In, S (2024) Elemental‐doped catalysts for photoelectrochemical CO2 conversion to solar fuels, Solar RRL, 8(11), 2400022, DOI: 10.1002/solr.202400022.

Bae, D (2023) Solar-Rechargeable Redox Flow Battery: Drawbacks and Opportunities Under Thermal Loads, ECS Meeting Abstracts, MA2023-02(47), pp.2404-2404, DOI: 10.1149/ma2023-02472404mtgabs.

Santander, D, Whitley, S, Kim, J, Bae, D (2023) Analysis of temperature distribution in PV-integrated electrochemical flow cells, Materials Futures, 2(4), pp.045103-045103, DOI: 10.1088/2752-5724/acf32e.

Bae, D (2023) A statistical approach to scaling up of CIGS PV cells: Quantitative analysis of composition uniformity within and between the samples, Materials Science in Semiconductor Processing, 164, pp.107626-107626, ISSN: 1369-8001. DOI: 10.1016/j.mssp.2023.107626.

Zia, AW, Hussain, SA, Rasul, S, Bae, D, Pitchaimuthu, S (2023) Progress in diamond-like carbon coatings for lithium-based batteries, Journal of Energy Storage, 72(Part E), 108803, ISSN: 2352-152X. DOI: 10.1016/j.est.2023.108803.

Bae, D and Bentien, A (2022) Take it to the Carnot limit: Perspectives and thermodynamics of dual-cell electrochemical heat engines, Energy Conversion and Management, 271, pp.116315-116315, ISSN: 0196-8904. DOI: 10.1016/j.enconman.2022.116315.

Marie, LF, Landini, S, Bae, D, Francia, V, O'Donovan, TS (2022) Advances in thermochemical energy storage and fluidised beds for domestic heat, Journal of Energy Storage, 53, pp.105242-105242, ISSN: 2352-152X. DOI: 10.1016/j.est.2022.105242.

Powar, NS, Hiragond, CB, Bae, D, In, S-I (2022) Two-dimensional metal carbides for electro- and photocatalytic CO2 reduction: Review, Journal of CO2 Utilization, 55, pp.101814-101814, ISSN: 2212-9820. DOI: 10.1016/j.jcou.2021.101814.

Whitley, S and Bae, D (2021) Perspective—Insights into Solar-Rechargeable Redox Flow Cell Design: A Practical Perspective for Lab-Scale Experiments, Journal of The Electrochemical Society, 168(12), pp.120517-120517, ISSN: 0013-4651. DOI: 10.1149/1945-7111/ac3ab3.

Bae, D, Kanellos, G, Faasse, GM, Dražević, E, Venugopal, A, Smith, WA (2020) Design principles for efficient photoelectrodes in solar rechargeable redox flow cell applications, Communications Materials, 1(1), 17, DOI: 10.1038/s43246-020-0020-7.

Bae, D (2020) A Comparative Study of (Cd,Zn)S Buffer Layers for Cu(In,Ga)Se2 Solar Panels Fabricated by Chemical Bath and Surface Deposition Methods, Materials, 13(7), pp.1622-1622, DOI: 10.3390/ma13071622.

Bae, D, Kanellos, G, Wedege, K, Dražević, E, Bentien, A, Smith, WA (2020) Tailored energy level alignment at MoOX/GaP interface for solar-driven redox flow battery application, The Journal of Chemical Physics, 152(12), 124710, ISSN: 0021-9606. DOI: 10.1063/1.5136252.

Oh, I-K, Kim, W-H, Zeng, L, Singh, J, Bae, D, Mackus, AJM, Song, J-G, Seo, S, Shong, B, Kim, H, Bent, SF (2020) Synthesis of a Hybrid Nanostructure of ZnO-Decorated MoS2 by Atomic Layer Deposition, ACS Nano, 14(2), pp.1757-1769, ISSN: 1936-0851. DOI: 10.1021/acsnano.9b07467.

Bae, D, Faasse, GM, Smith, WA (2020) Hidden figures of photo-charging: a thermo-electrochemical approach for a solar-rechargeable redox flow cell system, Sustainable Energy & Fuels, 4(6), pp.2650-2655, DOI: 10.1039/d0se00348d.

Bae, D, Seger, B, Hansen, O, Vesborg, PCK, Chorkendorff, I (2019) Durability Testing of Photoelectrochemical Hydrogen Production under Day/Night Light Cycled Conditions, ChemElectroChem, 6(1), pp.106-109, ISSN: 2196-0216. DOI: 10.1002/celc.201800918.

Bae, D, Faasse, GM, Kanellos, G, Smith, WA (2019) Unravelling the practical solar charging performance limits of redox flow batteries based on a single photon device system, Sustainable Energy & Fuels, 3(9), pp.2399-2408, DOI: 10.1039/c9se00333a.

Wedege, K, Bae, D, Smith, WA, Mendes, A, Bentien, A (2018) Solar Redox Flow Batteries with Organic Redox Couples in Aqueous Electrolytes: A Minireview, The Journal of Physical Chemistry C, 122(45), pp.25729-25740, ISSN: 1932-7447. DOI: 10.1021/acs.jpcc.8b04914.

Wedege, K, Bae, D, Dražević, E, Mendes, A, Vesborg, PCK, Bentien, A (2018) Unbiased, complete solar charging of a neutral flow battery by a single Si photocathode, RSC Advances, 8(12), pp.6331-6340, DOI: 10.1039/c8ra00319j.

Bae, D, Pedersen, T, Seger, B, Iandolo, B, Hansen, O, Vesborg, PCK, Chorkendorff, I (2017) Carrier-selective p- and n-contacts for efficient and stable photocatalytic water reduction, Catalysis Today, 290, pp.59-64, ISSN: 0920-5861. DOI: 10.1016/j.cattod.2016.11.028.

Bae, D, Seger, B, Vesborg, PCK, Hansen, O, Chorkendorff, I (2017) Strategies for stable water splitting via protected photoelectrodes, Chemical Society Reviews, 46(7), pp.1933-1954, ISSN: 0306-0012. DOI: 10.1039/c6cs00918b.

Bae, D, Mei, B, Frydendal, R, Pedersen, T, Seger, B, Hansen, O, Vesborg, PCK, Chorkendorff, I (2016) Back‐Illuminated Si‐Based Photoanode with Nickel Cobalt Oxide Catalytic Protection Layer, ChemElectroChem, 3(10), pp.1546-1552, ISSN: 2196-0216. DOI: 10.1002/celc.201500554.

(2016) Array, 3(10), ISSN: 2196-0216. DOI: 10.1002/celc.v3.10.

Bae, D, Mei, B, Frydendal, R, Pedersen, T, Seger, B, Hansen, O, Vesborg, PCK, Chorkendorff, I (2016) Cover Picture: Back‐Illuminated Si‐Based Photoanode with Nickel Cobalt Oxide Catalytic Protection Layer (ChemElectroChem 10/2016), ChemElectroChem, 3(10), pp.1515-1515, ISSN: 2196-0216. DOI: 10.1002/celc.201600567.

Bae, D, Mei, B, Frydendal, R, Pedersen, T, Seger, B, Hansen, O, Vesborg, PCK, Chorkendorff, I (2016) Back‐Illuminated Si‐Based Photoanode with Nickel Cobalt Oxide Catalytic Protection Layer, ChemElectroChem, 3(10), pp.1517-1517, ISSN: 2196-0216. DOI: 10.1002/celc.201600566.

Bae, D, Pedersen, T, Seger, B, Hansen, O, Vesborg, PCK, Chorkendorff, I (2016) Carrier Selective Contacts Design for Efficient Photocatalytic Water Reduction, ECS Meeting Abstracts, MA2016-02(49), pp.3715-3715, ISSN: 2151-2043. DOI: 10.1149/ma2016-02/49/3715.

Bae, D, Palmstrom, A, Roelofs, K, Mei, B, Chorkendorff, I, Bent, SF, Vesborg, PCK (2016) Tailoring Mixed-Halide, Wide-Gap Perovskites via Multistep Conversion Process, ACS Applied Materials & Interfaces, 8(23), pp.14301-14306, ISSN: 1944-8244. DOI: 10.1021/acsami.6b01246.

Bae, D, Shayestehaminzadeh, S, Thorsteinsson, EB, Pedersen, T, Hansen, O, Seger, B, Vesborg, PCK, Ólafsson, S, Chorkendorff, I (2016) Protection of Si photocathode using TiO2 deposited by high power impulse magnetron sputtering for H2 evolution in alkaline media, Solar Energy Materials and Solar Cells, 144, pp.758-765, ISSN: 0927-0248. DOI: 10.1016/j.solmat.2015.10.020.

Mei, B, Pedersen, T, Malacrida, P, Bae, D, Frydendal, R, Hansen, O, Vesborg, PCK, Seger, B, Chorkendorff, I (2015) Crystalline TiO2: A Generic and Effective Electron-Conducting Protection Layer for Photoanodes and -cathodes, The Journal of Physical Chemistry C, 119(27), pp.15019-15027, ISSN: 1932-7447. DOI: 10.1021/acs.jpcc.5b04407.

Seger, B, Mei, BT, Frydendal, R, Permyakova, A, Bae, D, Pedersen, T, Castelli, I, Malacrida, P, Vesborg, PCK, Stephens, IEL, Hansen, O, Jacobsen, K, Chorkendorff, I (2015) Using Protection Layers for a 2-Photon Water Splitting Device, ECS Meeting Abstracts, MA2015-01(37), pp.2016-2016, ISSN: 2151-2043. DOI: 10.1149/ma2015-01/37/2016.

Kemppainen, E, Bodin, A, Sebok, B, Pedersen, T, Seger, B, Mei, B, Bae, D, Vesborg, PCK, Halme, J, Hansen, O, Lund, PD, Chorkendorff, I (2015) Scalability and feasibility of photoelectrochemical H 2 evolution: the ultimate limit of Pt nanoparticle as an HER catalyst, Energy & Environmental Science, 8(10), pp.2991-2999, ISSN: 1754-5692. DOI: 10.1039/c5ee02188j.

Bae, D, Pedersen, T, Seger, B, Malizia, M, Kuznetsov, A, Hansen, O, Chorkendorff, I, Vesborg, PCK (2015) Back-illuminated Si photocathode: a combined experimental and theoretical study for photocatalytic hydrogen evolution, Energy & Environmental Science, 8(2), pp.650-660, ISSN: 1754-5692. DOI: 10.1039/c4ee03723e.

Mei, B, Permyakova, AA, Frydendal, R, Bae, D, Pedersen, T, Malacrida, P, Hansen, O, Stephens, IEL, Vesborg, PCK, Seger, B, Chorkendorff, I (2014) Iron-Treated NiO as a Highly Transparent p-Type Protection Layer for Efficient Si-Based Photoanodes, The Journal of Physical Chemistry Letters, 5(20), pp.3456-3461, ISSN: 1948-7185. DOI: 10.1021/jz501872k.

Bae, D, Kwon, S, Oh, J, Kim, WK, Park, H (2013) Investigation of Al2O3 diffusion barrier layer fabricated by atomic layer deposition for flexible Cu(In,Ga)Se2 solar cells, Renewable Energy, 55, pp.62-68, ISSN: 0960-1481. DOI: 10.1016/j.renene.2012.12.024.

Bae, D, Gho, J, Shin, M, Kwon, S (2013) Effect of zinc addition on properties of cadmium sulfide layer and performance of Cu(In,Ga)Se2 solar cell, Thin Solid Films, 535, pp.162-165, ISSN: 0040-6090. DOI: 10.1016/j.tsf.2012.11.077.

Pawar, SM, Pawar, BS, Gurav, KV, Bae, DW, Kwon, SH, Kolekar, SS, Kim, JH (2012) Fabrication of Cu2ZnSnS4 Thin Film Solar Cell Using Single Step Electrodeposition Method, Japanese Journal of Applied Physics, 51(10S), pp.10NC27-10NC27, ISSN: 0021-4922. DOI: 10.1143/jjap.51.10nc27.

Dowon, B, Sehan, K, Joonjae, O, Joowon, L, Wookyoung, K (2011) Fabrication of High Efficiency Flexible CIGS Solar Cell with ZnO Diffusion Barrier on Stainless Steel Substrate, MRS Proceedings, 1324, mrss11-1324-d18-05, ISSN: 0272-9172. DOI: 10.1557/opl.2011.966.



Conferences

Brightman, E, Robertson, S, Lyth, S, Sims, R, Tuohy, P, Lue, L, Bae, D, Berlouis, L (2024) Flow battery activities at the University of Strathclyde. In IFBF 2024: The International Flow Battery Forum, 25 -27 June 2024, Glasgow, UK, Glasgow, pp.30-31, ISBN: 9781916200449.

Vesborg, PC, Bae, D, Seger, BJ, Chorkendorff, I, Hansen, O, Pedersen, T, Mei, B, Frydendal, R (2016) Protected, back-illuminated silicon photocathodes or photoanodes for water splitting tandem stacks (Conference Presentation). In Dong, C-L (ed) Solar Hydrogen and Nanotechnology XI, pp.12-12, DOI: 10.1117/12.2238697.



Datasets

Kim, J, Akhtar, T, Liu, Y, Smirnov, V, Kim, H, In, S-I, Han, DH, Bae, D (2025) Supplementary information files for " A 25 cm2 single Si-based solar redox flow battery with aqueous iodine-bromine redox couples", DOI: 10.17028/rd.lboro.30317617.

Bae, D, Maldifassi, JTB, Russell, J, Kim, J (2024) Solubility of redox couples and cell voltage data, DOI: 10.17028/rd.lboro.25999504.



Other

Bae, D, Lecourt, N, Guy, A, Kim, J (2024) Solar Thermal Integrated Alkaline Water Electrolyser for Fast Ramping Up, There is significant recent interest in clean hydrogen production from renewable water electrolysis. In general, alkaline water electrolysis (AWE) operates with a voltage of ca. 2 V due to ohmic and overpotential-derived loss (0.7~0.8 V) [1]. In addition, it requires 0.5~1 hours for the ramping-up, which hinders its wider implementation. Our intended solution is to introduce a heat-tolerant electrolyser integrated with a chemically resistant solar thermal collector, providing a heated electrolyte to increase the reactivity [2] and reduce the ramp-up time. In this work, we discuss key dimensional design aspects of the thermal collector for alkaline electrolyser, considering the control feasibility of operating temperature and fluidic parameters. Furthermore, we also demonstrate our proof-of-concept experimental results using our alkaline electrolyser integrated with the solar-thermal collector at an elevated temperature. The time-dependent current output of the solar-thermal integrated AWE over the first 1 h yielded ca. 70% higher compared to the conventional AWE system. E. Amores, J. Rodríguez, J. Oviedo, A. De Lucas-Consuegra, Open Eng 2017, 7,141–152. B. Zhang, Q. Daniel, M. Cheng, L. Fan, L. Sun, Faraday Discuss 2017, 198, 169–179 Figure 1 . DOI: 10.1149/ma2024-01341841mtgabs.

Kim, J and Bae, D (2024) Solar Flow Battery for Grid Innovation: Exploring Novel Cell Designs and Osmotically Balanced Neutral pH Electrolytes, The demand for clean and efficient energy with low carbon emissions has been increased continuously. In 2022, 29.9% of global electricity production came from renewable energy sources, and the UK contributed a relatively high percentage of 41.5%. However, it appears to lag behind the Nordic countries, showing an impressive 81.2% of its electricity from renewable sources. The primary hurdle to expanding the share of renewable energy is intermittency. There is a crucial need for research and development in energy storage systems to enhance this aspect. Among various renewable energy storage technologies, redox flow battery (RFB) has recently come into the spotlight because of its scalability, long-term storage capability, and fast kinetics. However, the highly concentrated acidic condition and high voltage of the conventional RFB electrolytes make applying this technology for the integration of Photovoltaic cells difficult. Here, we report a, efficient solar-rechargeable redox flow battery (SRFB) with significantly enhanced safety and stability. Particularly, we introduce a competitive osmotically-balanced neutral pH aqueous Iodine/Bromine electrolyte combination, which has not been used for solar-to-electricity storage technologies. The present work holds great potential for safe and reliable charging/discharging operations to existing photovoltaic-assisted battery technologies. These results promote the utilization of existing solar cell facilities and are a cornerstone for the development of SFBs for practical and efficient energy storage devices. . DOI: 10.1149/ma2024-013598mtgabs.

Bae, D and Lazennec, Q (Accepted for publication) Drawings and dimensional information of metal-free solar-thermal collector for electrochemical cells, These are 2D and 3D drawings of a metal-free solar-thermal collector, which is applied to an electrochemical flow cell. The computational works have been conducted by Quentin Lazennec under Dr Dowon Bae's supervision. The conceptual design was done by Dr Bae and 2D and 3D drawing works were done by Mr Lazennec. This outcome is a part of our EPSRC-funded project. .

Bae, D and Emberson-Marl, J (Accepted for publication) Drawings and dimensional information of metal-free flat plate helical solar thermal collector, These are 3D drawings of a metal-free solar-thermal collector with flat helical tubing, which is applied to an electrochemical flow cell. The computational works have been conducted by Joseph Emberson-Marl under Dr Dowon Bae's supervision. This outcome is a part of our STFC-funded project (TECHydro).© the authors.

Bae, D and Emberson-Marl, J (Accepted for publication) Drawings and dimensional information of metal-free solar thermal collector with fresnel lens, These are 3D drawings of a metal-free solar-thermal collector with a Fresnel lens, which is applied to an electrochemical flow cell. The computational works have been conducted by Joseph Emberson-Marl under Dr Dowon Bae's supervision. This outcome is a part of our STFC-funded project.© the authors.

Bae, D, Russell, J, Kim, J (Accepted for publication) Methodology - Copper Hexacyanoferrate Electrodes for Electrochemical Characterisation, This document outlines the methodology for fabricating copper hexacyanoferrate (CuHCF) electrodes for thermally regenerative electrochemical cycle experiments.© the authors.



Getting in touch

Research Office
Loughborough University
Loughborough
Leicestershire
LE11 3TU
researchpolicy@lboro.ac.uk
+44 (0)1509 222453